User's Manual
Table Of Contents
- Introduction
- The Integrator’s Task
- Installing the Modem
- Mounting the Boomer II OEM Modem to Your Device
- Connecting the Data Interface Port
- Selecting & Positioning the Antenna
- Supplying Power
- Using the Modem Test Jig
- Software Development Tools
- Integration Testing
- Appendix A - NCL Interface
- Appendix B – SDK NCL-API and Port Server
- Multisession API
- Application Interface
- _
- Opening a Session
- Close Session
- Send Data to a Radio Host
- Receive Data From RPM
- Get RPM Status Information
- Set Configuration ITEMS Within the RPM
- Reset RPM
- Register Event Callback Function
- Enable / Disable Events
- Get Error Description
- Register Wakeup Application
- Deregister Wakeup Application
- Switch RPM On/Off
- Send Generic NCL Command To RPM
- Get Software Version
- _
- A
- Appendix C – SDK Sample programs
- Appendix D - Application Development
- Appendix E - Message Routing and Migration
- Appendix F – Guide to Desense
- Appendix G - Numeric Conversion Chart
- Appendix H - Specifications
- Appendix I - Glossary
Wavenet Software Development Tools___________________________ Boomer II User Manual & Integrator’s Guide
Copyright Wavenet Technology © November 2003 68 BM210012WT37
TTY Control View
The TTY control View allows the user to perform the following:
• Display detailed commands and responses. The commands to the
modem and the responses from the modem are displayed in Hex
format. A maximum of 200 bytes is displayed per command or
response.
• Allows the user to enable / disable the wc.log file. The log file will
contain the information displayed in the Edit View window for
future reference.
• Allows the user to run standard NCL command by selection of the
<NCL CMD> button. The user can edit the ncl_generic.def file
with an external editor as required.
• Allows the user to run a user defined NCL command by selection
of the <User CMD> button. The user can modify the
user_defined.def file using an external editor as required. Details
on how to generate a user command are contained in the def file.
• Clear the Edit View screen by selection of the <Clear Screen>
Button.
Edit View
The Edit View displays the commands issued to the modem and the
modems responses. Wavenet Commander will where possible interpret
the modem’s response, and display the response in detail; otherwise the
response will be displayed as hex bytes. From this window the user can
issue some basic commands that include the underscore ‘_’ command
which will get the modems status and the exclamation command “|” for
the modem settings. Pressing ‘?’ will display basic help.
Hot Keys
Wavenet Commander has the following Hot Keys.
• F4 Standard NCL command Selection.
• F5 User NCL Command Selection
• F6 Communication port configuration.