User's Manual
Table Of Contents
- Introduction
- The Integrator’s Task
- Installing the Modem
- Mounting the Boomer II OEM Modem to Your Device
- Connecting the Data Interface Port
- Selecting & Positioning the Antenna
- Supplying Power
- Using the Modem Test Jig
- Software Development Tools
- Integration Testing
- Appendix A - NCL Interface
- Appendix B – SDK NCL-API and Port Server
- Multisession API
- Application Interface
- _
- Opening a Session
- Close Session
- Send Data to a Radio Host
- Receive Data From RPM
- Get RPM Status Information
- Set Configuration ITEMS Within the RPM
- Reset RPM
- Register Event Callback Function
- Enable / Disable Events
- Get Error Description
- Register Wakeup Application
- Deregister Wakeup Application
- Switch RPM On/Off
- Send Generic NCL Command To RPM
- Get Software Version
- _
- A
- Appendix C – SDK Sample programs
- Appendix D - Application Development
- Appendix E - Message Routing and Migration
- Appendix F – Guide to Desense
- Appendix G - Numeric Conversion Chart
- Appendix H - Specifications
- Appendix I - Glossary
Appendix A - NCL INTERFACE ________________________________ Boomer II User Manual & Integrator’s Guide
Copyright Wavenet Technology © November 2003 80 BM210012WT37
Commands Value Parameters Value Sub-values and Descriptions
R_RX_STATUS ASCII b Get receiver enable status.
R_TX_STATUS ASCII c Get transmitter enable status.
R_ANTENNA ASCII d Get antenna selection status.
R_RADIO_IN_RANGE ASCII e Get radio in range status.
R_OB_MSG_COUNT ASCII f Count of outbound messages queued.
R_IB_MSG_COUNT ASCII g Count of inbound messages queued.
R_FLOW_CONTROL ASCII h Get flow control status.
R_EVENT_STATES ASCII i Get current event reporting enable/disable state.
R_RADIO_CHANNEL ASCII j Get current radio channel.
R_CHAN_BLOCK ASCII k Get RPM RF channel status block.
R_RF_STATISTICS ASCII l Get RPM RF statistics block.
R_BAT_LEVEL ASCII m Get battery status.
ASCII n..x Reserved.
R_DCHAN_TABLE ASCII y Read dynamic channel table.
R_CHAN_TABLE ASCII z Read static channel table.
SET_CNF ASCII 5 Set modem configuration.
S_RCV_MODE ASCII A Select the confirmed/unconfirmed Receive Data mode.
S_INACTIVITY_
TIMEOUT
ASCII A Vendor-specific: Set read time for outbound packet.
S_TX_CONTROL ASCII B Enable/disable the transmitter.
S_RX_CONTROL ASCII C Enable/disable the radio.
S_FLOW_CONTROL ASCII D Select the flow control method:
FLOW_NONE No flow control. ASCII 0
FLOW_XONXOFF XON/XOFF ASCII 1
FLOW_RTSCTS RTS/CTS ASCII 2
S_RADIO_CHANNEL ASCII E Select the radio channel.
S_CUR_CNF ASCII F Save the modem configuration
R_DEF_CNF ASCII G Restore the modem configuration
R_STO_CNF ASCII H Read the modem configuration:
CNF_EVENT_ Event control flag ASCII 0
FLAGS settings
CNF_DELIVERY_ Outbound SDU del. ASCII 1
MODE mode
CNF_RADIO_ Radio control ASCII 2
CONTROL settings:
S_RX_CONTROL ASCII C
S_TX_CONTROL ASCII B
S_POWER_SAVE ASCII I Set the Power Save mode.
S_ROAM_MODE ASCII J
Set the roaming mode:
ROAM_
MANUAL
Set to manual. ASCII 0
ROAM_AUTO Set to automatic. ASCII 1