User's Manual
Table Of Contents
- Introduction
- The Integrator’s Task
- Installing the Modem
- Mounting the Boomer II OEM Modem to Your Device
- Connecting the Data Interface Port
- Selecting & Positioning the Antenna
- Supplying Power
- Using the Modem Test Jig
- Software Development Tools
- Integration Testing
- Appendix A - NCL Interface
- Appendix B – SDK NCL-API and Port Server
- Multisession API
- Application Interface
- _
- Opening a Session
- Close Session
- Send Data to a Radio Host
- Receive Data From RPM
- Get RPM Status Information
- Set Configuration ITEMS Within the RPM
- Reset RPM
- Register Event Callback Function
- Enable / Disable Events
- Get Error Description
- Register Wakeup Application
- Deregister Wakeup Application
- Switch RPM On/Off
- Send Generic NCL Command To RPM
- Get Software Version
- _
- A
- Appendix C – SDK Sample programs
- Appendix D - Application Development
- Appendix E - Message Routing and Migration
- Appendix F – Guide to Desense
- Appendix G - Numeric Conversion Chart
- Appendix H - Specifications
- Appendix I - Glossary
Appendix A - NCL INTERFACE ________________________________ Boomer II User Manual & Integrator’s Guide
Copyright Wavenet Technology © November 2003 90 BM210012WT37
Parameter length : 0x0001 (“Byte3Byte4”)
Parameter contents : One unsigned byte (“Byte5”) indicating the Power
Save mode as follow:
ASCII ‘0’ : EXPRESS (Disabled
Power Save or “full awake” mode).
ASCII ‘1’ : MAXIMUM (4 windows).
ASCII ‘2’ : AVERAGE (8 windows).
ASCII ‘3’ : MINIMUM (16 windows).
Parameter name: WN_PROFILE
Parameter number : 0x6600 (“Byte1Byte2”) (ASCII 0x66 = ‘f’)
Parameter length : 0x0001 (“Byte3Byte4”)
Parameter contents: One unsigned byte with the number of the new
active profile.
Note: See the Network Profiles section on page 26 for
more information.
Parameter name: WN_MSG_RX_NOTIF_TMR
Parameter number : 0x6E00 (“Byte1Byte2”) (ASCII 0x6E = ‘n’)
Parameter length : 0x0002 (“Byte3Byte4”)
Parameter contents: One unsigned word (2 bytes) containing the
number of milliseconds between message
notifications to the Palm. The maximum setting is
65 seconds (65000 milliseconds).