User's Manual
Table Of Contents
- Introduction
- The Integrator’s Task
- Installing the Modem
- Mounting the Boomer˚III OEM Modem to Your Device
- Connecting the Data Interface Port
- Selecting & Positioning the Antenna
- Supplying Power
- Using the Modem Test Jig
- Software Development Tools
- Integration Testing
- Appendix A – Guide to Desense
- Appendix B - Numeric Conversion Chart
- Appendix C – Boomer-III Specifications
- Appendix I - Glossary
Boomer-III User Manual & Integrator’s Guide__________________________________APPENDIX H - Specifications
BM310012WT05 85 Copyright Wavenet Technology © October 2003
Appendix C – Boomer-III Specifications
Physical Properties
Weight < 75g
Size (L x W x H) 68mm x 42mm x 8mm
Communication Protocols
Modem to radio network protocol Mobitex
Modem to host protocol MASC
9600 bps
7 data bits, even parity, 1 stop bit
Environmental Conditions
Operating temperature
-30°C to +60°C
Storage temperature
-40°C to 70°C
Relative Humidity 0 to 95%
Ports
Data Interface Port 3V logic level serial port,
9600 baud
RF Connector
MMCX female socket, 50Ω.
Straight connection or right angle mating
connector may be fitted
LED Indicators
Power Green flashes when scanning
On, when locked
Off, when the Boomer-III is off
Transmit Red flashes when transmitting
Receive Green flashes when receiving
Power
Voltage 3.8V nominal
(3.4 to 4.8V range)
Transmit < 1.6 A (2.2 A if mismatched antenna)
Receive < 80 mA
Standby < TBD mA
(Add ~1.2 mA if LED’s enabled)
Off current consumption <20 µA
Power Supply Ripple < 15 mV peak to peak