Consulting * Research * Training * Certification Testing Since 1981 FCC ID: PQSWAVENET-DUAL-V Exhibit 9 User’s Manual June 2001 APREL Project No.
PDA Wireless Modem attachment for Palm V/Vx Dualwave V Model: DWV 100D User Manual
© Wavenet Technology Pty Ltd ACN 079 965 003 Publication No. xxxx xxxx ( Fourth Draft 25th May) Published May 2001 This publication is copyright and no part may be reproduced or copied without the prior consent of: Wavenet Technology Pty Ltd. 140 Burswood Rd Burswood Perth WA 6100 Australia Telephone: Facsimile: E-mail: Web Site: +61 8 9262 0200 +61 8 9355 5622 wavenet@wavenet.com.au www.wavenet.com.au This manual is intended to be used for the operation of Wavenet Technology equipment.
Dualwave V User Manual _______________________________________________________ Using Your Dualwave V Contents Introduction ..................................................................................................... 4 Features .......................................................................................................4 Compliance Statement .................................................................................5 Information for Your Safety.......................................
Using Your Dualwave V _______________________________________________________Dualwave V User Manual Introduction The Dualwave V is a wireless modem developed for Personal Digital Assistants (PDAs), such as the Palm V/Vx™ and IBM Workpad 3™. It enables access to worldwide DataTAC wireless networks in the USA, Canada, Malaysia, Singapore, Hong Kong, Taiwan and Australia. This technology offers the following unique benefits to the PDA user.
Dualwave V User Manual _______________________________________________________ Using Your Dualwave V Compliance Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Using Your Dualwave V _______________________________________________________Dualwave V User Manual Switch the Dualwave off in areas where radio devices are forbidden, or when it may cause interference or danger. For example, fuel depots (fuel storage and distribution areas), chemical plants, locations in which hazardous or combustible gases may be present and where blasting operations are in progress. Do not use the Dualwave V in an aircraft.
Dualwave V User Manual _______________________________________________________ Using Your Dualwave V • The Dualwave V or Battery Charger exhibits a distinct change in performance. Failure to observe all these instructions will void the limited warranty.
Using Your Dualwave V _______________________________________________________Dualwave V User Manual System Requirements To install the Dualwave V software, your computer system must meet the following minimum requirements: • Intel compatible 486 computer or higher • Windows 95, Windows 98, or Windows NT 4.0 • 8 MB RAM (memory) minimum, 16 MB recommended • 1 MB available hard disk space • CD-ROM drive • One available serial port (9-pin).
Dualwave V User Manual _______________________________________________________ Using Your Dualwave V Exploring Your Dualwave V Latch Palm port On/Low battery indicator Data Interface port Release Button On/Off button Online indicator HotSync® button The Dualwave V is made up of the following components: Data Interface port Provides a serial connection to the PC and connects the power supply to the modem. Palm port Provides a connection between the PDA and the modem.
Using Your Dualwave V _______________________________________________________Dualwave V User Manual Getting Started Before using your Dualwave V you must: • Fully charge the Dualwave V’s battery • Connect the Dualwave V to your palm • Install the installation software on your computer and your PDA • Set your profile, USA or Canada Charging the Dualwave V’s Battery Your Dualwave V’s lithium battery is supplied discharged. For optimum performance, you should charge it fully before use.
Dualwave V User Manual _______________________________________________________ Using Your Dualwave V Follow the steps below to charge the PDA and Dualwave V’s battery: 1. Attach the Data Comms Modem connector to the Dualwave V’s Data Interface port located on the left hand side of the unit. 2. Plug the Battery Charger’s power cable into the Data Comms PC connector. 3. Plug the Battery Charger into a power source for approximately three hours.
Using Your Dualwave V _______________________________________________________Dualwave V User Manual Connecting Your Dualwave V to the PDA To connect the Dualwave V to your PDA, follow the steps below: 1. Slide the PDA into the Dualwave V so that the palm ports are aligned. 2. Press the release button on the left hand side of the Dualwave V and press the back of the PDA into the Dualwave V until you hear a click. The button engages a latch that secures the PDA to the Dualwave V.
Dualwave V User Manual _______________________________________________________ Using Your Dualwave V Installing the Software To install the Dualwave V software installation application, attach the Dualwave V to your PDA, as described in the previous section. Connect the Data Comms Modem connector to the Dualwave V’s Data Interface port. This is located on the left hand side of the Dualwave V. Connect the Data Comms PC connector to a COM (serial) port on your computer.
Using Your Dualwave V _______________________________________________________Dualwave V User Manual Removing the Software To remove the software, follow the procedure below: 1. Tap the Applications icon on the main screen of your PDA. 2. Tap the Menu icon. 3. Tap App. 4. Tap Delete. 5. Tap the Dualwave V application. 6. Tap Delete. 7. Tap Yes. 8. Tap Done. Setting Your Profile The default profile is U.S.A.
Dualwave V User Manual _______________________________________________________ Using Your Dualwave V Tap Done to save the settings and return to the Main screen.
Using Your Dualwave V _______________________________________________________Dualwave V User Manual Using Your Dualwave V Data Comms PC connector On/Low battery indicator On/Off button Data Comms Modem connector HotSync ® button Data Interface Port Online indicator Ensure your Dualwave V is fully charged and is attached to the PDA before use, as described earlier. Press the On/Off button on the Dualwave V. The On/Low battery indicator should display green.
Dualwave V User Manual _______________________________________________________ Using Your Dualwave V Setting the Power Save Option The Dualwave V is designed to stay on so that it can notify you when it receives incoming messages and so you can quickly access your e-mail messages and information from the web. To conserve power, the Dualwave V can be pre-set to go to sleep when not in use.
Troubleshooting______________________________________________________________Dualwave V User Manual Troubleshooting Before contacting technical support, try the following: • Charge the Dualwave V as described earlier. • Ensure all connections are secure and the Dualwave V’s On/Low battery indicator is green. • Perform a soft reset by pressing the reset button located on the back of the Dualwave V.
Dualwave V User Manual _____________________________________________________________ Troubleshooting A description of the screen layout is shown below: Battery level This indicates the status of the battery. Low battery levels can affect the connection. LLI Logical link Identifier. This is the unique identity of the modem. Software version The software version of the Dualwave V Installation program. Cellular Signal Present This indicates the cellular coverage.
Specifications________________________________________________________________Dualwave V User Manual Care & Maintenance Your Dualwave V is supplied maintenance free. However, periodically clean off the dirt and dust that may adhere to the exterior casing. Use the following procedures: 1. Disconnect the Battery Charger and cables from the Dualwave V. 2. Dampen a clean, soft cloth with water and wring the cloth well. 3. Use the well rung cloth to gently remove dirt and dust.
Dualwave V User Manual _______________________________________________________________ Specifications Specifications Physical Properties Weight Approximately 150 g Size (L x W x H) 127 mm x 80 mm x 12 mm Power Lithium-ion battery (3.6 V) 1400 mA/hour 3.
Specifications________________________________________________________________Dualwave V User Manual Data Interface Port RS-232 compatible serial port, operating speeds up to 115200 baud Palm Port Palm compatible port LED Indicators Power on/off and battery status Green - Power on, battery charged Red - Low battery Online Green - Online Battery Charger External dual output 4.1/4.2 V DC battery charger Type Constant current / constant voltage Weight Approx.
