I.D. AL - FLASH MPX HD - Full HD video Player - User Manual FLASH MPX HD MANUAL ® Waves System V 1.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual Table of contents A - Safety instructions B - Product information 1 - Product presentation 2 - Functionnalities 3 - Installation 4 - Operating mode 4.1 - First use 4.2 - Play manually the audio/video files 4.3 - Sleep and waking mode 5 - Configuration 5.1 - RTC - Setup time and date 5.2 - Network - Setup Ethernet parameters 5.3 - Auto Play - Setup autoplay mode 5.4 - Slideshow Time 5.5 - Baudrate - Setup RS232 internal link 5.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual CAUTION! DO NOT EXPOSE TO HUMIDITY & DUST! Unplug the power supply cable before any servicing FOR YOUR SAFETY, PLEASE READ THE USER’S GUIDE CAREFULLY BEFORE OPERATING YOUR PLAYER. A. SAFETY INSTRUCTIONS A.1 CE marking The CE marking is found on the nameplate, at the rear side of the device.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual conversion of the device automatically entails loss of the homologation. The operation of a modified device is liable to a penalty. In the interest of occupational safety, the operator and the user are held responsible for complying with the regulations. • Keep the original packing for a possible product re-shipment. Also ensure to keep the packing material out of children's reach.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual A.6 - Terms of use: • This product has been designed for indoors use only. • If this device has been exposed to very high temperature fluctuations (e.g.: after transportation), do not connect it immediately. The condensation formed inside the device could damage it. Allow the device to attain ambient temperature before connecting it. • Do not shake the device, avoid sudden movements during its installation or handling.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual 1 - Product presentation The Flash MPX HD is an Audio/Vidéo full HD player. The files are stored on an USB device, stick or hard disk. This standalone player can read files automatically when switch on. Using the trigger input, you can play the selected files. With the RS485 link, you will send command to the player. (select folder, play, stop ...
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual SPDIF digital audio out: Digital audio out using TOSLINK fiber optic cable. Connect this into digital audio processor unit using fiber optic cable. The Flash MPX HD will pass through digital audio including AC3 stereo and Dolby 5.1. Dry contact inputs: you can connect push buttons, presence, light and smoke detectors, heat sensors, pressure probes… to the input to trigger the player if a specific event occurs.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual 3 - INSTALLATION 5 6 7 8 9 RS485 link 10 1 - On/Off switch 2 - USB device connector to update internal HDD 3 - Infrared sensor for remote control.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual 4 - First use Before to use the Flash MPX HD, you need to make some adjustments like video resolution, network parameters... 1 - Connect Flash MPX HD on a screen and insert a USB flash drive. Connect PSU and switch on. Power LED is on and you can see a first welcome page during few seconds. The complete boot is about 30 seconds then another static page is displayed if no file are playing in autoplay mode.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual 5 - QUICK START How to play the first file ? The Flash MPX HD plays from : - USB 2.0 memory device such as USB drive, USB External hard drive, memory card reader etc. - 2.5” SATA laptop/solid state hard drive from the built in 2.5” internal SATA socket. To automatically play after powering up, the player needs these items in the drive : 1 - At least 1 folder and one file in this folder. File could be Video or Jpeg.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual 6 - Play mode The Flash MPX HD offer 2 play modes. Standard Mode and Fast mode. With Standard mode, you can use easily the player without any programmation. When you trigger a folder using an input, you can see a latence (0.5s up to 2s) before to display the first image. With fast mode, you can start a video without latence but you need to prepare a special video file and a config file. 6.1 - STANDARD MODE 6.1.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual The simultaneous use of several input contacts offers up to 7 different combinations. No. 001 to 007 corresponds to the 3 input contact combinations. Special case: Folder 000 is the folder which will be played by default on powering on. On powering on, presence of this folder is checked ; if it is present, the player plays files of this folder. If this folder is missing, the player wait and display a wait screen. 6.1.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual Example: 001 [RND]: RND for Random order By choosing [RND] you select Random mode. The files are not read again as long as all the files have not been read at least once. This information is not stored during a folder jump. Without this parameter, the default mode is the random mode SEQ. ● [Vxx] - Sets the volume level of the folder The name of the folder can include parameter to set the audio volume.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual 6.2 - FAST MODE 6.2.1 - Operating mode and naming of files - In this mode, the player will play a video segment instantly when an input is triggered. - The player will play only a single file in the root, it will not play multiple files. - After powering up, the player will seamlessly loop line 000 (see line 000 explanation below).
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual And here is an example of the memory card in fast mode: Example USB drive: Myvideo.mpg fastmode.txt And here is the content of the fastmode.txt: 000=00,100 001=100,140 002=140,260 003=260,320 Explanation: If fastmode.txt is present, player is in Fast Mode (important: lower case letters only) 000=00,100 000 is the main loop file. This line 000 will automatically loop after powering up. (-> Garden.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual Another sample fastmode.txt in fast mode using input codes X,N and L: 000=00,100 001=100,300 002X=300,620 003N=620,820 004L=820,9000 Explanation: 000=00,100 The player will automatically loop line 000 after powering up. Playtime is 100 seconds. 001=100,300 If input 1 is triggered, player will instantly jump to position 100 second and start play. At position 300 second, player will return to loop line 000. Playtime is 200 seconds.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual 7 - RS485 serial link protocol The player can communicate with other devices. It receives commands on the Rx input. The player complies with the RS485 norm. 1 - +12V 2 - RX3 - RX+ 4 - Ground / 0V 5 - Not connected 6 - Not connected Baudrate: 9600 Data bits: 8 Parity: none Stop bit:1 Handshaking: none Reception Protocole The player can receive commands to start reading a folder.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual List of commands: ● 00000000b (00h) : not used ● 00000001b (01h) : Jump to a folder (standard mode) or a segment (fast mode) and Play - Standard mode : Jump to a folder With this command you can select and play 128 differents folder (000 to 127). When a jump command is received, the player select the folder and play the first file. The optionnal paramaters in the name of the folder are used. (SEQ or RND, Jump, volume ....
I.D.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual 8 - Ethernet link Via the Ethernet link, the Flash MPX HD communicates to update content via network. (Samba) Caution! Network administration requires good computer skills. In a local network installation, the player requires an IP address. This address is set in the Option menu (see option menu chapter). The player is then recognised on the network.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual 9 - Configuration You can change the parameters in the setup menu of the Flash MPX HD Press «setup» key from the remote control. Note : To navigate into the menu, use the arrow keys. 9.1 - Audio Menu: To adjust audio parameters (analog and digital output). 9.2 - Video Menu : In this menu you can change brightness, contrast, video output .... ® Waves System - 19 - V 1.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual 9.2 - Network Menu : You can set the network parameters like DHCp, IP address. Contact your administrator for all details. ® Waves System - 20 - V 1.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual 9.2 - System Menu: Change the language of the setup menu and some other parameters. 9.3 Misc Menu: You can adjust few optionals parameters. Here, you can check the current firmware version. ® Waves System - 21 - V 1.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual Annexe A - Specifications • Power supply : 12V DC • Comsuption : 800mA • Size : Width : 158mm - Height : 30mm Depth without connector : 110mm Weight : 320g • Connectors : - Audio/Vidéo : 1 x HDMI 1.3 out - type A (Digital Audio + Video) 1 x YPbPr Video out (Mini jack 3.5mm 4 points) 1 x Audio line out + composite video out (Mini jack 3.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual Annexe B - Functions Video output : • SD PAL/576p - 720x576 - 50i/25p (4:3 and 16:9) • SD NTSC/480p - 720x480 - 60i/30p ips (4:3 and 16:9) • HD 1280x720 - 24p/30p (720p) • HD 1920x1080 - 60i/50i/24p/30p (1080i / 1080p) Type of extentions : • .avi .mpg .mpeg .mov .mp4 • .mp3 .wav .ogg .aac .mkv, jpeg, jpg, bmp, png, tif, gif Files supported : • AVI (Video For Windows / Avi, DivX) • MOV (QuickTime File Format - AVC / H.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual Annexe C : Memory Storage Média : • SD card : SD/SDHC - Use Class 4 for for HD files • USB Flash memory (stick) compatible USB 1.1 and USB 2.0 • USB External Hard Drive compatible USB 2.0 • USB Card reader 100% compatible "Mass storage" USB 1.1 et USB 2.0 to use CF/MMC/MS Pro • 2.5’’ SATA I / II Hard Disk (internal) *** Only internal HDD are available on SAMBA server to use on the network.
I.D.
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual http://www .id-al.com http://www.id-al.com ® Waves System V 1.