User manual

® Waves System V 1346 - 2012
I.D. AL - My Music Player - Audio Player - User manual
- 6 -
Memory card:
Select a quality SD card. Insert the card into the slot to the stopper without forcing it. To remove, gently
press on the card to release it.
USB To Host:
To this port, you can connect a USB device, stick or hard disk.
Generally, new SD cards or USB sticks are formatted in "FAT" or "FAT32".
If you must format a card or a stick, select the FAT32 format depending on memory size. (FAT32 above
512Mb). Other types of formatting do not work.
New Hard Disks are not formatted. You must create a partition and format the disk before any usage.
Select FAT32 format. Other types of formatting do not work. Some utility programs are available to carry
out this operation on your computer (including some freeware).
Volume control:
Turn the DATA button to adjust the volume level. Note! Volume can also be changed through the Ethernet,
Programming and Infrared remote control.
RS232 Serial link:
The My Music Player can be operated through a PLC, a computer or a remote control using the serial link.
Analog audio output: Connect the stereo output to an amplifier, a sound system, an audio mixer or any
other audio equipment with a line level input (CD player type).
Command
by RS232
External source (Aux)
FTP, http, NTP
Web radio
Sound system
12V Power Supply