User Manual

RIDER FADER is Vocal Rider’s automatic control, which moves according to the internal
detectors’ algorithm to level-out the vocal, similar to manual fader riding. (The TARGET
control is used to set the Rider Fader ‘0’ calibration.)
Range: -12 to +12 dB
Default: Idle value
If touched by the mouse, the Rider Fader allows manual gain adjustment. Once the
mouse is released, the Rider Fader will continue automatic riding.
AUTOMATION MODE controls the Rider Fader operation.
When set to Off, the Rider Fader will use its internal engine and will not send out nor
read automation.
Range: Off, Write, Read
Default: Off
When set to Write, all Rider Fader movements are sent to the host application
automation lane. (DAW host automation must be enabled in write/touch/latch mode, and
the Rider Fader must be armed for automation).
Though the Rider Fader moves automatically, it is treated by the host application as if
automation is being written manually. When set to Read, the Rider Fader uses the
automation lane to define its movement, disregarding Vocal Rider’s internal engine.
Waves Vocal Rider
User Guide
10