User Guide

DiGiGrid IOX / User Guide
14
ANALOG SECTION
There are twelve mic preamp and line inputs and six line outputs. Each preamp channel is represented by a button that
turns the channel on or off. Each channel has a meter and a clip indicator. Select a channel and it will appear in the
Focus section, where preamp parameters are controlled.
Use the Focus section on the left side to adjust preamp levels and turn the
48V phantom on and off. The long meters range from -80 dBFS to 0 dBFS.
Mic/Line knob gain range: 0 dB to +52.5 dB in 7.5 dB steps
Fine knob digital gain range: 0 dB to +7 dB in 0.5 dB steps
A clip indicator holds for two seconds or for as long as clipping persists.
Peak hold persists until you reset it by clicking on the indicator or
switching to a different input.
An orange light on a channel button indicates that phantom power for that
channel is active. This status is also shown in the Focus section.