User Guide

DiGiGrid IOX / User Guide
16
CLIP INDICATION AND SMALL METERS
Clip Indication Threshold sets the level where clipping is shown on the meter in the Focus section. The threshold can be
set to 0 dB, -1 dB, -2 dB, or -3 dB. This setting is global: it affects level indication for all channels, inputs and outputs.
Each channel button—analog or digital, input, or output—has a small level meter that
indicates when signal is present and provides a rough idea of level. A red light on the channel
button indicates clipping.
Headphone output levels are indicated in the same manner
DIGITAL SECTION
Digital inputs and outputs can be switched on or off and controlled in the Focus section in the same manner as the
analog.