User Guide

DiGiGrid IOX / User Guide
4
Hardware and Connections
IOX is a 1U rack-mounted device. Aside from headphone jacks, all connections are on the rear panel.
There are twelve Mic/Line input connections, six line output connections, word clock and Ethernet I/O.
IOX
FRONT PANEL
Input clipping Red = Clipping (level can be set through the control panel)
Input signal present Green = Signal present
48V phantom power Orange = Phantom On
Network status indicator
Blue: the device is recognized by the SoundGrid network.
Red: the device is not recognized by the SoundGrid network
Yellow: updating
White: unit malfunction (e.g., firmware did not load properly, unit did not boot properly).
Cycling through colors: used to identify the unit from the device rack or control panel.
Power switch/indicator
Four ¼-“ TRS headphone jacks with individual volume control knobs,(range: 8 to 600 ohms; gain: Off to +15 dB)