User Guide
Table Of Contents
DiGiGrid IOX / User Guide
6
Getting Started
Configure SoundGrid and assign your devices as follows, however large or small your system.
Connect the hardware
Install the software
Configure your system
Connect the Hardware
One I/O
In this example, one DiGiGrid IOX is connected directly to the SoundGrid host computer using a Cat 5e Ethernet cable or
better. The SoundGrid ASIO/Core Audio driver is used for plugin processing and/or DAW playback/recording.
Host computer with SoundGrid application
SoundGrid I/O device
The LAN port that’s connected to the SoundGrid network should be used for SoundGrid only. Do not share this port with
the internet or other networks.
In this configuration, all plugin processing is carried out on the host computer. The speed and power of the host
determines overall latnecy.