SoundGrid Studio User Guide / Owners Manual
Table Of Contents
- Welcome to SoundGrid Studio
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Setup Window Overview
- Network Controls
- Device Racks: Assigning and Managing Network Devices
- I/O Devices Racks
- I/O Device Racks Displays and Controls
- I/O Devices Menu Items
- SG Connect
- I/O Sharing
- Connected Systems
- System Inventory in Super Systems
- Sharing a Device
- Setting up Device Sharing
- Shared Devices: Clocking Considerations
- Patching Shared Devices
- Patching Shared Output Devices
- Shared and Un-Shared Devices in the Patch
- Removing Shared Devices
- If the Sharing Host Becomes Unavailable
- Share Preamp Control
- Servers
- External Control Devices
- Setting Sample Rate
- Assigning I/O Devices Manually
- Working Offline
- Mixer Settings
- User Interface Settings Section
- Patch Window Sections
- The Patch Grid
- Mixer Layers
- Mixer Channels
- Mixer Layer Modes
- Using Plugins
- Monitor Panel
- INCORPORATING MIDI
- MACKIE CONTROL PROTOCOL
- Setting Up Mackie HUI in a DAW
- Setup Window Overview
- Part 4: Patch Window
- Part 5: Mixer Window
- Appendix
Part 3: Setup Window
SoundGrid Studio/ User Guide
58
Update Plugins
If you install and activate new plugins—purchased or demo—while SoundGrid Studio is running, they may not be
recognized immediately. Click the Scan button. This initiates a scan of all installed and licensed plugins and enables
SoundGrid Studio to recognize them. If plugins are still not found, read this technical support article.
GENERAL SETTINGS
Enable Notification Center
SoundGrid Studio provides pop-up windows to guide you through the Auto-Config
process. Turn notifications on or off here.
Auto-Assign Local SoundGrid Driver
Sets whether or not Auto-Configuration assigns the host computer’s SG driver to the inventory. Deselect this option
if you prefer to assign the ASIO/Core Audio driver manually.
Launch Application on Startup
By default, SoundGrid Studio is launched on host computer startup and remains on until quit manually. Deselect this
to prevent automatic launching.
TROUBLESHOOTING SECTION
Enable Logging
SoundGrid Studio constantly logs its activity for purposes of troubleshooting. Click on the
Logs button to access the log files. Under certain circumstances, Waves technical support
may ask for more comprehensive records for enhanced troubleshooting.
Select Enable Logging to create verbose records. Deselect for normal operation.
Show Patch Warnings
When selected, a warning is issued when any routing change is made in the Patch window. You can also set this
preference in the Patch window.