Do not use in environments below 0℃/32℉ or above 40 ℃/104 ℉
After setting FIT to the correct mode, open the corresponding DAW and set the FIT controller as follows: LV1 In the System Inventory Device racks, add MidiPlus FIT as a Control device. Click the Gear button to open the MidiPlus control panel. Set Input and Output ports to FIT. In the Preferences window, under Link MIDI tab, set MackieControlXT with Port Ableton Live 2 as Input and Output. Set MackieControl with Port 1 as Input and Output.
Channel faders Touch-sensitive motorized faders Mute Mutes the corresponding channel’s output signal Solo Activates CUE or SOLO, depending on LV1 Cue channel settings. A rotar y encoder controls the channel’s preamp gain or pan. Click utility button #1 to toggle between Rotary encoder gain or pan (default) . This toggle affects allchannels in the layer. The value and label of this control are displayed onthe scribble strip.
11 Touch and Turn control Tap repeatedly to set the tempo Layer select Selects one of eight layers Utility section (eight buttons) 1. Toggle rotary encoders on all channels between preamp gain and pan control. 2. Assignable button (set in control panel) 3. Assignable button (set in control panel) 4. Assignable button (set in control panel) 5. Stores current condition as new scene. 6. Custom layers mode. When Custom is selected, the eight numbered buttons are used to select a custom layer.
Step 1：Remove the 2 side panels Waves eMotion LV1 Configuration 1. In the System Inventory page, select the FIT controller from the Controls drop-down menu. 2. Click on the Gear symbol to access the MIDIPLUS FIT control panel. 3. Choose input and output ports from the drop-down menus. 4. Select which LV1 mixer (Mixer 1 or Mixer 2) will be controlled by the MIDIPLUS FIT faders.
Specifications Faders 17 touch-sensitive 100mm motorized faders Encoders 17 clickable rotary encoders 17 RGB backlit Select buttons Buttons 17 Blue backlit Solo buttons 17 Red backlit Mute buttons 16 RGB backlit Layers select and Utility buttons Pad 1 RGB backlit Tap tempo pad Display 17 1.14” TFT LCD 2 USB LED light ports Connectivity 1 USB 2.0 high speed port 1 DC input Power Supply DC Power adapter (DC 12V/2.5A, center-positive) Dimensions (W x D x H) 44.9 cm x 28.4 cm x 6.9 cm 17.
FIT LABEL LV1 Mode Logic Pro Mackie Control Mode Steinberg Ableton Live Select (1 - 16) Select 1 - 16 Select Channel Select Channel Select Channel Mute (1 - 16) Mute 1 - 16 Mute Channel Mute Channel Mute Channel Solo (1 - 16) Solo 1 - 16 Solo Channel Solo Channel Solo Channel USER User MUTE(Master) Main Mute Record Ready Channel Record Ready Channel Record Ready Channel Global View Edit Returns SOLO(Master) Main Solo Solo Clear Solo Clear Solo Clear TOUCH & TURN Touch & Turn
FIT LABEL HUI Mode Pro Tools Descriptions Select (1 - 16) Select/Rec Ready/V-Sel/Insert Depending on the USER button mode Mute (1 - 16) Mute Channel / Solo (1 - 16) Solo Channel / Pan mode Select 1-16 = Channel select Rotary 1-16 control Pan. Color Code = Off Record Ready mode Select 1-16 = Reccord Ready. Rotary 1-16 control Pan. Color Code = Red. Send mode Select 1-8 = V-Sel, control Send Pre/Post. Rotarty 1-8 control Send Level, Rotarty 9-16 control Pan.
Layer Keys Mode AUTO 1 Read / 2 Write / 3 Touch / 4 Latch / 5 Trim / 6 Off / 7 Bank left / 8 Bank right / 7 10
