Specifications

Audio Plug-Ins Guide298
Tempo Controls
Link To Tempo
When the Link To Tempo option is enabled, the
LFO rate is set to the Pro Tools session tempo,
and any tempo changes in the session are fol-
lowed automatically. When Link To Tempo is
enabled, the LFO rate slider is ignored and the
tempo displayed in the LCD always displays the
current session tempo.
Duration Selector
The Duration selector works in conjunction
with the session tempo, LFO rate, and Beat
Clock trigger. By default, Duration is set to 1
bar. At that setting, the LFO cycles once within
one bar. When Duration is set to 1 beat, the LFO
cycles within the duration of one beat. When
Link to Tempo is activated, the Duration selec-
tor sets the LFO rate as a function of the tempo
of the Pro Tools session. The Duration selector
also controls how often the Beat Clock trigger is
activated.
Tempo Display
The Tempo Display displays the tempo in BPM.
The value in the Tempo Display can also be ed-
ited directly by clicking it.
Envelope Section
When you select Envelope as the Modulation
source, Modulation (as shown in the Modula-
tion Meter) is controlled by the audio signal and
the Envelope Detector section controls.
Tempo controls
The Link To Tempo control is only available
on Pro Tools 6.1 and later. In earlier re-
leases of Pro Tools, manually set the LFO
rate to match the session tempo for the same
effect.
Selecting Duration
Tempo Display
Envelope section
When the Envelope Detector is not in use,
the controls in this section have no effect on
the sound.