User Guide
Table Of Contents
- Introduction
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Assigning Devices: Inventory Page
- Network Control Section (Top)
- Assignment Slots
- Device Rack Elements
- I/O Device Assignment Slots
- Assigned Hardware I/IO Devices
- Offline Devices
- Software Device (Driver)
- Servers Assignment Slots
- Controllers Assignment Slots
- Assigning I/O Devices
- I/O Device Icon Indicators
- I/O Devices Menu Items
- Setting Clock Master
- Certain device menu items apply only to drivers.
- Working with Multiple Systems
- Servers
- Settings Page
- Assigning Devices: Inventory Page
- Part 4: Patch Window
- Part 5: Rack Window
- Part 6: Overview Windows
- Part 7: Show Window
- Supplementary Material
SuperRack SoundGrid / User Guide
119
Loading a Session
Load a session with the “Load” button above the Sessions list or from the Sessions drop-down menu in the Top Bar.
LOADING A SESSION FROM THE SESSIONS LIST
The Load command loads the selected session (blue) from the Sessions list. This list includes all sessions that have
been created, loaded, or imported since the list was last cleared. Open lets you navigate to any session.
If the current session has changed since it was last saved, there will be a prompt asking if you’d like to save it before
loading the new session. If the new session has the same number of racks and calls for the same or similar I/O
inventory, then the new session will load immediately. When working on the same SuperRack repeatedly, this is
often the case.
L
OADING SESSIONS FROM THE SESSION MENU
The Session menu is located on the right side of the Top Bar. It’s a quick way to load and save
sessions and templates.
Important: Loading a session can result in an audio dropout or a
click. Do not load a new session when this is not acceptable.