User Guide
Table Of Contents
- Introduction
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Assigning Devices: Inventory Page
- Network Control Section (Top)
- Assignment Slots
- Device Rack Elements
- I/O Device Assignment Slots
- Assigned Hardware I/IO Devices
- Offline Devices
- Software Device (Driver)
- Servers Assignment Slots
- Controllers Assignment Slots
- Assigning I/O Devices
- I/O Device Icon Indicators
- I/O Devices Menu Items
- Setting Clock Master
- Certain device menu items apply only to drivers.
- Working with Multiple Systems
- Servers
- Settings Page
- Assigning Devices: Inventory Page
- Part 4: Patch Window
- Part 5: Rack Window
- Part 6: Overview Windows
- Part 7: Show Window
- Supplementary Material
SuperRack SoundGrid / User Guide
122
Templates
A template is a session based on a previous session or a factory preset. It
loads all SuperRack settings (except the I/O inventory), which facilitates
moving projects between systems whose inventories are not identical.
When creating a new session, it’s common to begin with a template from
the Presets menu.
A newly loaded template does not appear in the Sessions list. Once you open a template and save it as a session
under the desired name, it will show up in the Sessions list. Use the Template Save button to create a session
template from the current session. Templates are stored in the Templates folder:
Mac: Users/Shared/Waves Audio/SuperRack SoundGrid/templates
Windows: Users\Public\Waves\ SuperRack SoundGrid\templates
Auto-Save Sessions (History)
SuperRack can save sessions automatically, either at user-defined intervals or each time snapshots are saved
or recalled. Auto-save settings are controlled in the Mixer Settings page (Setup > Settings > History).
There are three Auto-Save controls:
No Auto-Save There are no automatic saves. No History files are created.
Auto-Save New History files are created at user-defined time intervals.
On Snapshot Update A History file is created each time a snapshot is recalled or stored.
In its default setting, Auto-Save is not active. If you want to use this feature, switch it on manually.