User Guide
Table Of Contents
- Introduction
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Assigning Devices: Inventory Page
- Network Control Section (Top)
- Assignment Slots
- Device Rack Elements
- I/O Device Assignment Slots
- Assigned Hardware I/IO Devices
- Offline Devices
- Software Device (Driver)
- Servers Assignment Slots
- Controllers Assignment Slots
- Assigning I/O Devices
- I/O Device Icon Indicators
- I/O Devices Menu Items
- Setting Clock Master
- Certain device menu items apply only to drivers.
- Working with Multiple Systems
- Servers
- Settings Page
- Assigning Devices: Inventory Page
- Part 4: Patch Window
- Part 5: Rack Window
- Part 6: Overview Windows
- Part 7: Show Window
- Supplementary Material
SuperRack SoundGrid / User Guide
131
Scope Parameters
Functions can be assigned to the scope of any snapshot:
Hot Plugins
The contents of the Hot Plugins Panel can be changed per snapshot. If Hot Plugins is selected, then
when this snapshot loads, it will also read what plugins should be in the HPP and will load them
accordingly. If the button is off, then the snapshot won’t update the contents of the HPP.
Windows Recalls which windows were open and how they were located on the screen when the snapshot was
stored. This allows you to create a specific workspace for a snapshot.
Name
Change rack name.
Dugan
Dugan Speech settings. Current Dugan settings will be within the scope of the snapshot.
BPM
Change system BPM.
Input
Rack input level
Output
Rack output level
In
Sets rack processing to In (enabled) or Out (bypassed)
Mute
Mutes the rack.
Plugins
These switches set whether a snapshot can change the parameters of any plugin in a specific plugin rack
slot number, regardless of the plugin. When, for example, “Plugin 7” is deselected, all plugins in slot 7 in any
rack are in recall safe mode when a snapshot is recalled.
Racks sets which racks are included in the scope of the snapshot. Scope parameters (e.g., Hot Plugins, Dugan, Mute)
apply only to highlighted racks, so a rack that is not highlighted will not change with a snapshot recall, regardless of the
Function settings. The number of racks in the Scope section reflects the current SuperRack configuration.
All/None Select: Resets the Scope selection to “all parameters/channels are within the scope of this snapshot” or “no
parameters/channels are within the scope of this snapshot.”