User Guide
Table Of Contents
- Introduction
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Assigning Devices: Inventory Page
- Network Control Section (Top)
- Assignment Slots
- Device Rack Elements
- I/O Device Assignment Slots
- Assigned Hardware I/IO Devices
- Offline Devices
- Software Device (Driver)
- Servers Assignment Slots
- Controllers Assignment Slots
- Assigning I/O Devices
- I/O Device Icon Indicators
- I/O Devices Menu Items
- Setting Clock Master
- Certain device menu items apply only to drivers.
- Working with Multiple Systems
- Servers
- Settings Page
- Assigning Devices: Inventory Page
- Part 4: Patch Window
- Part 5: Rack Window
- Part 6: Overview Windows
- Part 7: Show Window
- Supplementary Material
SuperRack SoundGrid / User Guide
28
Latency Group Assignment
Use the Latency Group Assignment drop-down menu to assign the
selected rack to a latency group. Latency groups are used to align
the delays of several racks and to set the delay of a group of racks.
To establish latency groups, the Latency Group setting in the
Settings page (Setup>Settings) must be set to “Align by Latency
Groups.” Setting “Align All Racks Automatically” aligns all racks to
match the rack with the greatest latency. Latency is explained in
detail in the Patch window chapter (pages 73–76).