User Guide
Table Of Contents
- Introduction
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Assigning Devices: Inventory Page
- Network Control Section (Top)
- Assignment Slots
- Device Rack Elements
- I/O Device Assignment Slots
- Assigned Hardware I/IO Devices
- Offline Devices
- Software Device (Driver)
- Servers Assignment Slots
- Controllers Assignment Slots
- Assigning I/O Devices
- I/O Device Icon Indicators
- I/O Devices Menu Items
- Setting Clock Master
- Certain device menu items apply only to drivers.
- Working with Multiple Systems
- Servers
- Settings Page
- Assigning Devices: Inventory Page
- Part 4: Patch Window
- Part 5: Rack Window
- Part 6: Overview Windows
- Part 7: Show Window
- Supplementary Material
SuperRack SoundGrid / User Guide
38
Assigning Devices: Inventory Page
The Inventory page is used to set up the SoundGrid network and to assign and manage devices. Use the top part of
the page to establish and monitor the network. Use the bottom part of the page to assign network devices, servers,
and controllers to SuperRack SoundGrid.
Network Control Section (Top)
INVENTORY/SETTINGS PAGE SELECTOR
LAN PORT DROPDOWN MENU
Use this menu to select the host computer’s LAN port that is connected to the SoundGrid network switch. The
name of the selected port is shown in the window. We recommend that the SoundGrid network is used exclusively
for SoundGrid devices. Use another port for other network functions.
LINK STATUS
Reports the status of the Ethernet connection to the host computer.
Range: UP / DOWN / INVALID
SPEED
Reports the speed of the SoundGrid network: 100 Mb/sec, 1 Gb/sec, N/A.
SAMPLE RATE
Reports the sample rate of the SoundGrid network.