User Guide
Table Of Contents
- Introduction
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Assigning Devices: Inventory Page
- Network Control Section (Top)
- Assignment Slots
- Device Rack Elements
- I/O Device Assignment Slots
- Assigned Hardware I/IO Devices
- Offline Devices
- Software Device (Driver)
- Servers Assignment Slots
- Controllers Assignment Slots
- Assigning I/O Devices
- I/O Device Icon Indicators
- I/O Devices Menu Items
- Setting Clock Master
- Certain device menu items apply only to drivers.
- Working with Multiple Systems
- Servers
- Settings Page
- Assigning Devices: Inventory Page
- Part 4: Patch Window
- Part 5: Rack Window
- Part 6: Overview Windows
- Part 7: Show Window
- Supplementary Material
SuperRack SoundGrid / User Guide
41
DEVICE RACK ELEMENTS
I/O
DEVICE ASSIGNMENT SLOTS
There are 16 device assignment slots for hardware I/O devices and drivers.
ASSIGNED HARDWARE I/IO DEVICES
Any device in the local SoundGrid network, as well as devices on other connected SoundGrid systems, can be
assigned to a rack slot.
OFFLINE DEVICES
Devices that are unavailable can be configured offline. When the hardware device becomes available, all device
settings, including routing assignments, will be applied to the hardware device.
SOFTWARE DEVICE (DRIVER)
A driver from the host computer can be assigned just like a hardware device.
SERVERS ASSIGNMENT SLOTS
You can assign up to four primary servers and up to four redundant servers. Servers can be assigned to any
available SuperRack on the LAN. Servers cannot be shared by multiple hosts.
CONTROLLERS ASSIGNMENT SLOTS
Use these slots to assign controllers to SuperRack.