User Guide
Table Of Contents
- Introduction
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Assigning Devices: Inventory Page
- Network Control Section (Top)
- Assignment Slots
- Device Rack Elements
- I/O Device Assignment Slots
- Assigned Hardware I/IO Devices
- Offline Devices
- Software Device (Driver)
- Servers Assignment Slots
- Controllers Assignment Slots
- Assigning I/O Devices
- I/O Device Icon Indicators
- I/O Devices Menu Items
- Setting Clock Master
- Certain device menu items apply only to drivers.
- Working with Multiple Systems
- Servers
- Settings Page
- Assigning Devices: Inventory Page
- Part 4: Patch Window
- Part 5: Rack Window
- Part 6: Overview Windows
- Part 7: Show Window
- Supplementary Material
SuperRack SoundGrid / User Guide
45
Three buttons at
the bottom of the slot provide access to hardware setup controls.
Item
Purpose
Action
Gear button
Control Panel access
Click to access device’s control panel
to adjust preamps, configure
channels, and control its clock. This
button is grayed out if the device
does not support a control panel.
ID
Locate hardware device
Activates a light on the front panel of the
hardware device associated with the
icon.
FW
Firmware status and re-flash start
Click the FW button to start firmware
update.
Gray
Firmware is compatible with installed mixer software.
Blue
Firmware is compatible with installed mixer software, but a newer version exists. Firmware should
be updated as soon as possible.
Red
Firmware is not compatible or is out of date. Click the FW button to re-flash device hardware.