User Guide
Table Of Contents
- Introduction
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Assigning Devices: Inventory Page
- Network Control Section (Top)
- Assignment Slots
- Device Rack Elements
- I/O Device Assignment Slots
- Assigned Hardware I/IO Devices
- Offline Devices
- Software Device (Driver)
- Servers Assignment Slots
- Controllers Assignment Slots
- Assigning I/O Devices
- I/O Device Icon Indicators
- I/O Devices Menu Items
- Setting Clock Master
- Certain device menu items apply only to drivers.
- Working with Multiple Systems
- Servers
- Settings Page
- Assigning Devices: Inventory Page
- Part 4: Patch Window
- Part 5: Rack Window
- Part 6: Overview Windows
- Part 7: Show Window
- Supplementary Material
SuperRack SoundGrid / User Guide
47
SETTING CLOCK MASTER
You can usually assign the clock master of the SOE network directly from the I/O Devices menu.
1. Select “Set Master.” This opens a drop-down menu of all I/O devices assigned to the SOE network.
2. Choose a device. Its icon changes to blue and “M” appears. Other assigned devices will become slaves.
The clock slave/master assignment of certain I/O devices cannot be changed directly from the SuperRack interface.
One example is when an I/O device is receiving clock from another device via word clock or AES. In this case, the
I/O clock cannot be set from the Inventory page, but rather from its own control panel.
Consult the user guide for your I/O devices if you need to change clock settings using the control panel.