User Guide

SuperRack SoundGrid / User Guide
54
Servers
Up to eight servers can be assigned to a SuperRack: four main processing servers and four redundant servers. This
provides a significant increase in processing capabilities, compared with single-server systems. Any server that is
connected to the same LAN as your SuperRack, is powered up, and has not already been assigned—whether to your
host or another— is available for assignment (refer to the diagram on p. 49).
4
.
Assigning Servers
Server assignment is the same for all SuperRack systems, regardless of the physical location of the servers.
There are four pairs of server slots: A, B, C, and D. A
server can be assigned to any slot, but the initial
assignment must be to Group A.
To assign a server to your SuperRack, follow these steps:
1. Choose an empty slot for assignment.
2. Click that slot’s plus (+) symbol. This opens the Server
Assignment drop-down menu.
3. Open the Devices sub-menu. All servers on the same LAN
will appear in the menu. Unassigned servers are shown in
white. Servers that are already assigned and unavailable are
grayed out.
4. Select a server from the list of available servers. The first
server you assign to a server group (whether in the left or
right column) will be the group’s primary server.
4
Version-specific limitations apply. Please check www.waves.com for specific information regarding constraints.