Product Specifications

2. Environmental
2.1 H
ANDLING,SAFETYAND ENVIROMENTAL REQUIREMENTS
CAUTION
The display module should not be e
xposed to harmful gases, such as acid and alkali gases,
which corrode electronic components.
Disassembling the d
isplay module can cause permanent damage and invalidate the warranty
agreements.
IPA solvent can onl
y be applied on active area and the back of a glass. For the rest part, it is
not allowed.
Observe general p
recautions that are common to handling delicate electronic components.
The glass can break and
front surfaces can eas
ily be damaged. Moreover the display is
sensitive to static electricity and other rough
environmental conditio
ns.
Mounting Precautions
(1) It`s recommended th
at you consider the mounting structure so that uneven force (ex.
Twisted stress) is not applied to the module.
(2) It`s recommended that yo
u attach a transparent protective plate to the surface in order to
protect the EPD. Transparent protective plate should have sufficient strength in order to resist
external force.
(3) You should adopt
radiation structure to satisfy the temperature specification.
(4) Acetic acid type and chlor
ine type materials for the cover case are not desirable because the
former generates corrosive gas of attacking the PS at high temperature and the latter causes
circuit break by electro-chemical reaction.
(5) Do not touch, push or rub the expos
ed PS with glass, tweezers or anything harder than HB
pencil lead. And please do not rub with dust clothes with chemical treatment. Do not touch the
surface of PS for bare hand or greasy cloth. (Some cosmetics deteriorate the PS)
(6) When the surface becomes dus
ty, please wipe gently with absorbent cotton or other soft
materials like chamois soaks with petroleum benzene. Normal-hexane is recommended for
cleaning the adhesives used to attach the PS. Do not use acetone, toluene and alcohol because
they
cause chemical damage to the
PS.
(7) Wipe off saliv
a or water drops as soon as possible. Their long time contact with PS causes
deformations and color fading.
Product
spe
cification The data sheet contains fina
l
pro
duct
spe
cifications.
WARNING
The display glass may break when it is dropped or bumped on a hard surface. Handle with
care. Should the display break, do not touch the electrophoretic material. In case of contact
with electrophoretic material, wash with water and soap.
2.13inch e-Paper
www.waveshare.com
9/39