Specification

9. Precautions
(1) Do not apply pressure to the EPD panel in order to prevent damaging it.
(2) Do not connect or disconnect the interface connector while the EPD panel is in operation.
(3) Do not touch IC bonding area. It may scratch TFT lead or damage IC function.
(4) Please be mindful of moisture to avoid its penetration into the EPD panel, which may
cause damage during operation.
(5) If the EPD Panel / Module is not refreshed every 24 hours, a phenomena known as
“Ghosting” or “Image Sticking” may occur. It is recommended to refreshed the ESL /
EPD Tag every 24 hours in use case. It is recommended that customer ships or stores the
ESL / EPD Tag with a completely white image to avoid this issue
(6) High temperature, high humidity, sunlight or fluorescent light may degrade the EPD
panel’s performance. Please do not expose the unprotected EPD panel to high
temperature, high humidity, sunlight, or fluorescent for long periods of time.
2.13inch e-Paper
www.waveshare.com
39/39