Datasheet

GD : First active gate = G0 (Fixed); LAST active gate = VRES[8:0] - 1
SD : First active source =S0 (Fixed); LAST active source = HRES[8:3]*8 – 1
(26) GSST Setting(GSST) (R65H)
Action W/R C/D D7 D6 D5 D4 D3 D2 D1 D0
Gate/Source
Start setting
0 0
0 1 1 0 0 1 0 1
0 1 - - - - - - - HST8
0 1 HST[7:3] 0 0 0
0 1 - - - - - - - VST[8]
0 1 VST[7:0]
This command defines the First Active Gate and First Active Source of active channels.
HST[8:3]: First active source. (Default: S0)
VST[8:0]: First active gate. (Default: G0)
(27) Get Status (FLG) (R71H)
Action W/R C/D D7 D6 D5 D4 D3 D2 D1 D0
Read Flags
0 0
0 1 1 1 0 0 0 1
1 1 - PTL_flag I
2
C_ERR I
2
C_ BUSY data_ flag PON POF BUSY
This command reads the IC status.
PTL_FLAG Partial display status (high: partial mode)
I
2
C_ERR: I
2
C master error status
I
2
C_BUSY: I
2
C master busy status (low active)
data_flag: Driver has already received all the one frame data
PON: Power ON status
POF: Power OFF status
BUSY: Driver busy status (low active)
(28) Auto Measure Vcom (AMV) (R80H)
Action W/R C/D D7 D6 D5 D4 D3 D2 D1 D0
Automatically measure Vcom
0 0
1 0 0 0 0 0 0 0
0 1 - - AMVT[1:0] XON AMVS AMV AMVE
This command reads the IC status.
AMVT[1:0]: Auto Measure Vcom Time
00b: 3s 01b: 5s (Default)
10b: 8s 11b: 10s
XON: All Gate ON of AMV
0: Gate normally scan during Auto Measure VCOM period. (default)
1: All Gate ON during Auto Measure VCOM period.
AMVS: Source output of AMV
0: Source output 0V during Auto Measure VCOM period. (default)
1: Source output VDHR during Auto Measure VCOM period.
4.2" e-Paper
www.waveshare.com
22／45