Data Sheet

Product Specification
Ver 1.2  20 / 43
WLSB[7:0]: LSByte of write-data to external temperature sensor.
This command only actives after R04H(PON) or R05H(PMES).
(25) Temperature Sensor Read (TSR) (R43H)
Action W/R C/D D7 D6 D5 D4 D3 D2 D1 D0
Read External Temperature
Sensor
0 0 0 1 0 0 0 0 1 1
1 1 RMSB[7:0]
1 1 RLSB[7:0]
This command reads the temperature sensed by the temperature sensor.
RMSB[7:0]: MSByte read data from external temperature sensor.
RLSB[7:0]: LSByte read data from external temperature sensor.
This command only actives after R04H(PON) or R05H(PMES).
(26) VCOM and Data Interval Setting (R50H)
Action W/R C/D D7 D6 D5 D4 D3 D2 D1 D0
Set Interval between
Vcom and Data
0 0 0 1 0 1 0 0 0 0
0 1 VBD[1:0] DDX[1:0] CDI[3:0]
This command indicates the interval of Vcom and data output. When setting the vertical back porch, the total blanking will be kept
(20 Hsync).
VBD[1:0]: Border data selection
B/W/Red mode (BWR=0)
DDX[0] VBD[1:0] LUT DDX[0] VBD[1:0] LUT
0
00 Floating
1(Default)
00 LUTB
01 LUTR 01 LUTW
10 LUTW 10 LUTR
11 LUTB 11(default) Floating
B/W mode (BWR=1)
DDX[0] VBD[1:0] LUT DDX[0] VBD[1:0] LUT
0
00 Floating
1(Default)
00 Floating
01 LUTBW (1→0) 01 LUTWB (1→0)
10 LUTWB (0→1) 10 LUTBW (0→1)
11 Floating 11 Floating
DDX[1:0]: Data polality.
DDX[1] for RED data, DDX[0] for BW data in the B/W/Red mode.
DDX[0] for B/W mode.
B/W/Red mode (BWR=0)
DDX[1:0] Data{Red, B/W} LUT DDX[1:0] Data{Red, B/W} LUT
00
00 LUTW
10
00 LUTR
01 LUTB 01 LUTR
10 LUTR 10 LUTW
11 LUTR 11 LUTB
.
2.7" e-Paper (B)