Data Sheet

Product Specification
Ver 1.2  22 / 43
(28) TCON Setting (TCON) (R60H)
Action W/R C/D D7 D6 D5 D4 D3 D2 D1 D0
Set Gate/Source Non-overlap Period
0 0 0 1 0 1 0 0 0 0
0 1 S2G[3:0] G2S[3:0]
This command defines non-overlap period of Gate and Source.
S2G[3:0] or G2S[3:0]: Source to Gate / Gate to Source Non-overlap period
S2G[3:0] or G2S[3:0] Period S2G[3:0] or G2S[3:0] Period
0000b 4 … …
0001 8 1011 48
0010 12(Default) 1100 52
0011 16 1101 56
0100 20 1110 60
0101 24 1111 64
Period = 660 nS.
(29) Resolution Setting (R61H)
Action W/R C/D D7 D6 D5 D4 D3 D2 D1 D0
Set Display Resolution
Action
0 0 0 1 1 0 0 0 0 1
0 1 - - - - - - - HRES[8]
0 1 HRES[7:1] -
0 1 - - - - - - - VRES[8]
0 1 VRES[7:0]
This command defines alternative resolution and this setting is of higher priority than the RES[1:0] in R00H (PSR).
HRES[8:1]: Horizontal Display Resolution
VRES[8:0]: Vertical Display Resolution
Channel disable calculation:
GD: First G active = G0; LAST active GD= first active +VRES [7:0] -1
SD: First active channel =S0; LAST active SD= first active +HRES [8:1]*2-1
(30) Source & gate start setting(R62H)
Action W/R C/D D7 D6 D5 D4 D3 D2 D1 D0
Source & gate
start setting
0 0 0 1 1 0 0 0 0 1
0 1 - - - - - - - S_start[8]
0 1 S_start[7] S_start[6] S_start[5] S_start[4] S_star[3] S_start[2] S_start[1] S_start[0]
0 1 - - - gscan - - - G_start[8]
0 1 G_start[7] G_start[6] G_start[5] G_start[4] G_start[3] G_start[2] G_start[1] G_start[0]
.
2.7" e-Paper (B)