Data Sheet

Product Specification
Ver 1.2 42 / 43
12. Point and line standard
Environment
Temperature Humidity Illuminance Distance Time Angle
23±2℃
55±
5%RH
1200～
1500Lux
300 mm 35 Sec
Name Causes Spot size Part-A Part-B
Spot
B/W spot in glass or
protection sheet,
foreign mat. Pin hole
D ≤ 0.25mm Ignore
Ignore 0.25mm ＜ D ≤ 0.4mm 4
0.4mm ＜ D 0
Scratch or line defect
Scratch on glass or
Scratch on FPL or
Particle is Protection
sheet.
Length Width Part-A
Ignore
L ≤2.0mm W≤0.2 mm Ignore
2.0 mm < L≤ 5.0mm 0.2 mm<W≤ 0.3mm 2
5.0 mm < L 0.3mm < W 0
Air bubble Air bubble
D1, D2 ≤ 0.2 mm Ignore
Ignore 0.2 mm < D1,D2 ≤ 0.35mm 4
0.35mm < D1, D2 0
Side Fragment
X≤5mm，Y≤1mm & display is ok, Ignore
Remarks: Spot define: That only can be seen under WS or DS defects.
 Any defect which is visible under gray pattern or transition process but invisible under black and white is disregarded.
 Here is definition of the “Spot” and “Scratch or line defect”.
Spot: W > 1/4L Scratch or line defect: W ≤1/4L
 Definition for L/W and D (major axis)
 FPC bonding area pad doesn’t allowed visual inspection.
Note: AQL = 0.
Shipment Inseption Standard
Part-A：Active area Part-B：Border area
Equipment：Electrical test fixture, Point gauge
Outline dimension：
64.0(H)×42.9(V) ×1.18(D)
Unit：mm
.
2.7" e-Paper (B)