Data Sheet

www.waveshare.com
12／40
VGHL_LV
VGHL Voltage level
00
VGH=20V, VGL= -20V
01 (Default)
VGH=19V, VGL= -19V
10
VGH=18V, VGL= -18V
11
VGH=17V, VGL= -17V
0: 3-bit data mode for pure driver
1: 2-bit data mode for pure driver (default)
Vsource_LV_EN: VSource LV power selection.
0: External source power from VSH_LV and VSL_LV pin.
1: Internal DCDC function for generate source power. (default)
VSource_EN: VSource power selection.
0: External source power from VSH and VSL pin.
1: Internal DCDC function for generate source power. (default)
VGate_EN: VGate power selection.
0: External gate power from VGH and VGL pin.
1: Internal DCDC function for generate gate power. (default)
VGHL_LVL[1:0]: VGH / VGL Voltage Level selection.
VDPS_LV[5:0]: Internal VDH power selection for Red LUT.
VDPS_LV
VDH_V
000000
3.0V
000001
3.2V
000010
3.4V
000011
3.6V
000100
3.8V
000101
4.0V (Default)
..
..
111100
15.0V
VDNS_LV[5:0]: Internal VDL power selection for Red LUT.
VDNS_LV
VDL_V
000000
-3.0V
000001
-3.2V
000010
-3.4V
000011
-3.6V
000100
-3.8V
000101
-4.0V (Default)
..
..
111100
-15.0V
3) Power OFF (POF) (R02H)
Action
W/R
C/D
D7
D6
D5
D4
D3
D2
D1
D0
Turning OFF the power
0
0
0
0
0
0
0
0
1
0
After power off command, driver will power off based on the Power OFF Sequence, BUSY signal will become “0”.
The Power OFF command will turn off DCDC, T-con, source driver, gate driver, VCOM, temperature sensor, but register and SRAM data