Data Sheet

www.waveshare.com
13／40
will keep until VDD off.
SD output and VCOM will base on previous condition. It may have two conditions: 0v or floating.
4) Power OFF Sequence Setting(PFS) (R03H)
Action
W/R
C/D
D7
D6
D5
D4
D3
D2
D1
D0
Setting Power OFF Sequence
0
0
0
0
0
0
0
0
1
1
0
1
-
-
T_VDS_OFF[1:0]
-
-
-
-
T_VDS_OFF[1:0]: Power OFF Sequence of VDH and VDL.
00b: 1 frame (Default) 01b: 2 frames 10b: 3 frames 11b: 4 frame
5) Power ON (PON) (R04H)
Action
W/R
C/D
D7
D6
D5
D4
D3
D2
D1
D0
Turning ON the Power
0
0
0
0
0
0
0
1
0
0
After the Power ON command, driver will power on based on the Power ON Sequence.
After power on command and all power sequence are ready, then BUSY signal will become “1”.
6) Booster Soft Start (BTST) (R06H)
Action
W/R
C/D
D7
D6
D5
D4
D3
D2
D1
D0
Setting Booster
Soft Start
0
0
0
0
0
0
0
1
0
0
0
1
BTPHA7
BTPHA6
BTPHA5
BTPHA4
BTPHA3
BTPHA2
BTPHA1
BTPHA0
0
1
BTPHB7
BTPHB6
BTPHB5
BTPHB4
BTPHB3
BTPHB2
BTPHB1
BTPHB0
0
1
BTPHC5
BTPHC4
BTPHC3
BTPHC2
BTPHC1
BTPHC0
7) Deep sleep (DSLP) (R07H)
Action
W/R
C/D
D7
D6
D5
D4
D3
D2
D1
D0
Deep sleep
0
0
0
0
0
0
0
1
1
1
0
1
1
0
1
0
0
1
0
1
This command makes the chip enter the deep-sleep mode. The deep sleep mode could return to stand-by mode by hard ward reset assertion.
The only one parameter is a check code, the command would be executed if check code is A5h.