Data Sheet

www.waveshare.com
33／40
2. LUT from flash
System power
Define the flash
SPI (0xe5,0x03)
Reset the EPD driver IC
Booster soft start
SPI (0x06,0xc7,0xcc,0x28)
Data start transmission 1
SPI (0x10)
Transport B/W data
Power setting
SPI (0x01,0x37,0x00,0x08,0x08)
Display refresh
SPI (0x12)
Power on
SPI ( 0x04)
Check BUSY pin
BUSY=Low
Check BUSY pin
BUSY=High
Panel setting
SPI (0x00,0xcf,0x00)
BUSY=Low
BUSY=High
Flash enable
SPI (0x65,0x01)
Turn off the flash
Flash data (0xb9)
PLL control
SPI (0x30,0x3a)
Flash disable
SPI (0x65,0x00)
Resolution setting
SPI (0x61,0x02,0x80,0x01,0x80)
Power off
SPI (0x02)
VCM_DC setting
SPI (0x82,0x1e)
Deep sleep
SPI (0x07,0xa5)
Vcom and data interval setting
SPI (0x50,0x17)