Datasheet

Game HAT User Manual
HOW TO USE
HARDWARE CONNECTION
1. Insert Raspberry Pi to Game HAT (GPIO pins header)
2. Connect HDMI. Insert the HDMI connector to screen and Raspberry Pi
- If you use Raspberry Pi Zero/Raspberry Pi Zero W, you need to use HDMI cable
3. Toggle the Battery switch of Game HAT to OFF, and mount 18650 battery to it.
OS
We provide image with driver pre-installed, you can download test image or you
can also download original Retropie image and install driver manually.
METHORD 1 USING TEST IMAGE
1) Download test image according to your Raspberry Pi
- Retropie-RPi2_RPi3-Image
- Retropie-RRi_zero-Image
2) Unzip the ZIP and write the image file to TF card
3) Inset the ready TF card to your Raspberry Pi, toggle Battery switch to ON.
- If battery is low, Raspberry Pi cannot start up. In this case, you can connect a
5V/2A power supply to Power interface of Game HAT for charging. Charge
indicator will flicker when charging. You can play during charging but note that