Datasheet

Game HAT User Manual
5) Inset the TF card and a USB keyboard to Raspberry Pi, open Battery switch to
power on Raspberry Pi. After booting, press F4 to open Terminal.
6) Execute commands as blow. (Make sure you have copy driver to Raspberry Pi as
step 3)
sudo tar xzvf /boot/Game-HAT-*.tar.gz
cd Game-HAT/
sudo ./Game-HAT
7) Reboot Raspberry Pi. Long press “A” button (other keys are OK as well) to enter
buttons configuration page. Configure keys as below. You can also long press
“A” or other buttons to pass the configuration.
After configuring:
1 Press “A” button to save configurations and exit.
2 Press “B” button to cancel configurations and exit without save.
8) The configuration is finished and you can try to play games now.