Data Sheet

RS232/485 TO ETH User Manual
5/22/19 www.waveshare.com/wiki 16 / 21
3. PARAMETER SETTING
There are three ways to configure RS232/485 TO ETH. They are setup software, Web Server
and AT command.
3.1. SETUP SOFTWARE
User can download setup software from
https://www.waveshare.com/wiki/RS232/485_TO_ETH_Software
When user want to configure the RS232/485 TO ETH by setup software, user can run setup
software, search RS232/485 TO ETH in same LAN and configure the RS232/485 TO ETH as follow:
After researching RS232/485 TO ETH and clicking RS232/485 TO ETH to configure, user need log
in with user name and password. Default user name and password both are admin. If user keep
the default parameters, it is not necessary to log in.
Figure 15 Setup software