Data Sheet

RS232/485 TO ETH User Manual
5/22/19 www.waveshare.com/wiki 17 / 21
3.2. WEB SERVER
User can connect PC to RS232/485 TO ETH through LAN port and enter Web Server to
configure. Web Server default parameters as follow:
Table 2 Web server default parameters
Parameter
Default settings
Web server IP address
192.168.0.7
User name
admin
Password
admin
After firstly connecting PC to RS232/485 TO ETH, user can open browser and enter default
IP 192.168.0.7 into address bar, then log in user name and password, user will enter Web Server.
Web Server screenshot as follow:
3.3. AT COMMAND
We have specific user manual for AT commands.
3.3.1. SERIAL AT COMMAND
In work mode, user can enter AT command mode and send AT commands to module to
configure the module.
3.3.2. NETWORK AT COMMAND
Network AT command is to send a search keyword by broadcast, then set the parameters in
a single broadcast way(If user want to use network AT command, module and PC which send the
Figure 16 Web Server