User Manual

www.waveshare.com Open103Z Testing Guide
20
UcosII2.91+UCGUI3.90A
Overview
UcosII2.91+UCGUI3.90A demo
Hardware Connection
·Connect the 3.2inch 320x240 Touch LCD (A) to the board via LCD Interface. As shown in the figure below:
Operation and Result
Launch the serial debugging assistant, and configure it as described in chapter "Preparation".
Info/message will be displayed on the uCOSView-V310G and LCD.
USARTx_pritf
Overview
USART serial port demo