User Manual

www.waveshare.com Open103Z Testing Guide
25
ENC28J60 Ethernet Board
Overview
ENC28J60 demo
PC IP Setting
Configure the local connection of PC as follows:
-- IP add: 192.168.0.11
-- NETMASK_ADDR: 255.255.255.0
-- GW_ADDR:192.168.0.1
Hardware Connection
·Connect ENC28J60 Ethernet Board to the board via SPI interface, and then connect it to PC via
straight-through Ethernet cable. As shown in the figure below:
Operation and Result
Enter 192.168.0.100/888 in the Internet Explorer URL bar, and then there will be a demo page.