User Manual

Open429I-C User Manual
Version: V1.3.3, Date: 2019.04.02 8 / 47
2. DEMO
⚫ KEIL MDK Version：5.12or above.
⚫ Programmer/Debugger: ST-LINK V2
⚫ Programming/Debugging interface: JTAG/SWD
⚫ Results of demo which based on serial port are all checked via onboard PL2303;
connect the USB cable to the USB TO UART interface.
⚫ PC’s serial port settings:
Baud rate
115200
Data bits
8
Stop bits
1
Parity bits
None
Flow control
None
Note: All the below Demo results are available when push the reset button after the
program has been downloaded.
2.1. LED
⚫ Overview
IO output demo
⚫ Hardware connection
Fit all the jumpers LED JMP
⚫ Operation and result
The LED blinking