User's Manual

9. REW : Back to previous song
10. Charging Point : Contacts for charging the battery
■ To charge the battery
1. Connect BT-1000’s USB Port (A) to PC’s USB
Port (B).
2. When charging, BT-1000 indicator light
flashes Red.
3. When the Red indicator light is turned off,
disconnect BT-1000’s USB Port from
PC’s USB Port (B).
* Recharging time
It usually takes approximately 2 hours to fully recharge the BT-1000 battery.
* Low Battery Warning
The Red indicator light is turned on.
Battery Notice
1. Over extended periods of time, battery gradually wears down and requires linger charging time. The situation is
normal. Additionally, the more you talk on the phone with BT-1000, the less standby time your battery has.
2. Risk of explosion if battery is replaced by incorrect type or is thrown into fire.
3. Do not store the BT-1000 in hot areas. High temperatures can shorten the life of internal electronic components,
damage battery, and warp or melt certain plastics.
4. Do not store the BT-1000 in cold areas. When it warms up to the normal temperature, moisture can form inside,
which may damage internal electronic circuit board.
■ How to wear the BT-1000
1. Connect neck strap to strap hole. 2. Connect earphone to 3. Turn BT-1000 on after pressing
(A->B) earphone jack. (A) button.