Specifications

4-25
Tilt Channel
Y/N - Designates which channels are used for the Tilt mode. Up to
nine channels can be designated as Tilt channels.
Scrambled
Y/N - Select Yes if the channel is scrambled. When a channel is
designated as scrambled, the sweep will only look at the video carrier
as a sweep reference, instead of both the video and audio carrier.
Note: a diamond will appear to the left of the channel type indicator
on most screens.
Audio Offset
Specifies the audio offset of the channel.
Audio Offset 2
Specifies the offset for the second audio carrier of a Dual type
channel.
An ADD and DELETE soft key allows for adding new channels to the
plan or deleting existing channels from the plan.
Press the Exit soft key to return to the Edit Channel Parameters
display.
Delete Unused Channels
Once the channel plan has been built, unused channels can be
deleted if desired. Doing this frees memory for other uses and
"unclutters" the channel plan. Select the Delete Unused Channels in
the Channel Plan menu and press ENTER.
Specify Auto Measurements
Press the ENTER key to specify the measurements to be taken
during the performance of an Auto Test. This feature allows the user
to specify which channels, C/N, Hum, and Modulation measure-
ments are made on.