Specifications

4-61
Use Up and Down arrow soft keys to scroll through the location
characteristics for the test being performed. Press the ENTER key
after each parameter is entered to update the display. If changes are
made and you want them updated in the location file, press the Save
soft key. If changes are made and the Save soft key is not pressed,
the changes will only affect the Auto Test that is about to be per-
formed. Press the OK soft key when completed.
Test Point Type
Use the Up and Down arrow keys to select the Test Point type.
When the desired Test Point type is selected, press the OK soft key.
The following is a list of Test Point types available:
Trunk Amp: Forward Trunk In
Forward Trunk Out
Bridger
Reverse Trunk In
Reverse Trunk Out
Line Extended: Line Extended In
Line Extended Out