Specifications

1-16

LINES/PAGELINES/PAGE

LINES/PAGE

For text reports, you can specify the number of lines that will be

printed on each page before a form feed command is sent. Enter 0 if

you do not want any form feeds to be sent.

BAUD RATEBAUD RATE

BAUD RATE

This is the baud rate that is used when your CLI-1450 communicates

with another device through the serial port. Generally, you will want

to use the highest rate supported. Be sure that the baud rate setting of

your CLI-1450 matches that of the device that it is connected to.

CLONECLONE

CLONE

You can easily transfer the entire configuration from one CLI-1450

unit to another. This saves you time when configuring multiple units.

First, connect a cable between the two CLI-1450 units. Select

CLONE only on the unit that you want to copy the

configuration to. Press the

soft key to begin the transfer.

Cloning copies the configuration information and active channel plan

only. If you wish to copy only channel plans, use the Copy Remote

Channel Plan command.

ImportantImportant

Important

Be sure that the baud rate setting of your CLI-1450 matches that of the

device that it is connected to (see BAUD RATE).

DIAGNOSTICSDIAGNOSTICS

DIAGNOSTICS

Performs hardware diagnostics and defaults stored preferences to

factory presets. Press the key to access the diagnostics options.

Factory DefaultFactory Default

Factory Default

Sets all stored preferences to factory presets. Press the

key to initiate the default operation.

ImportantImportant

Important

All stored settings are lost when you perform this operation.

Test Display

Exercises all pixels on the LCD for test purposes. Repeated

pressing of the key sequences the display between all

pixels "on", all pixels "off", and the display test screen.