Specifications

1-19

You can selectively enable or disable each individual limit. When a

limit is disabled, your CLI-1450 excludes it when checking limits. If

the highlighted limit is disabled, you can enable it by pressing the

soft key. A check mark appears in the left-hand column to

indicate when a limit is enabled. If the limit is already enabled,

pressing the soft key disables it.

NoteNote

Note

Analog limits are enabled by factory preset default. Digital limits are

disabled by factory preset default.

NoteNote

Note

If you disable all of the limits within a test point, the test point

becomes disabled. You cannot enable a test point that has no enabled

limits.

You can edit the value of the highlighted limit by pressing the

key. When the edit box becomes active, enter the desired value. Be

sure to press the key when finished to terminate your entry. Once

all desired test points are enabled and edited, the unit will be able to

measure digital signals during an Installation Check or an Auto Test.

Press the soft key to return all limits in the test point to their

factory preset values.

CALIBRATIONCALIBRATION

CALIBRATION

Performs user calibration for optimum measurement accuracy. Press

the key to access the calibration options.