Specifications

1-33
How to configure a digital carrierHow to configure a digital carrier
How to configure a digital carrierHow to configure a digital carrier
How to configure a digital carrier
1. From the Configure - Edit Channel Plan screen (page 1-29),
highlight the channel that you wish to configure as digital, or
select an unused channel.
2. Press to bring up the Configure - Edit Channel screen.
3. Highlight TYPE, choose SNGL and press .
4. Highlight Carrier and press . Select a digital carrier
(QAM, QPSK, QPR, CAP-16) and press .
5. Highlight Frequency, press . Type in a value for Center
Frequency and press .
6. Highlight Measurement BW (MHz), press . Type in a
value for the bandwidth and press .
7. Highlight channel number, press . Type in a value for
the channel number and press .
8. Press the return softkey.
Select Tilt ChannelsSelect Tilt Channels
Select Tilt ChannelsSelect Tilt Channels
Select Tilt Channels
From the Channel Plan screen, highlight SELECT TILT CHAN-
NELS and press to specify carriers to measure on the TILT screen.
A list of all enabled channels in the current plan appears.