Specifications

2-18

When you have selected the limits submenu, the marker information

below the graph is replaced by the overall limit check summary for

channels currently being displayed on the graph. For each limit, the

worst case actual value is displayed along with a pass/fail status. The

results are updated upon the completion of each scan.

ImportantImportant

Important

The limit check results apply only to the channels currently being

displayed on the graph — not the entire channel plan.

NoteNote

Note

Only the limits that are enabled in the selected test point appear on

this screen.

Your CLI-1450 can indicate the minimum and maximum carrier level

limits on the graph. The out-of-limit portions appears as diagonal

“hash” areas. You can toggle the hash lines on and off by pressing the

key.

NoteNote

Note

The limit check results are updated with each scan. They are also

updated immediately when you press the or soft keys.

When you are finished viewing the overall limit results, press the

soft key to return to the main menu.

CHECKING LIMITS ON AN INDIVIDUALCHECKING LIMITS ON AN INDIVIDUAL

CHECKING LIMITS ON AN INDIVIDUAL

CHANNELCHANNEL

CHANNEL

Indicators appear in the marker information area when a channel is

outside the limits of the currently selected test point.