User Manual

© 2012 Wavetrend Europe Limited | All Rights Reserved | All specifications are subject to change without notice.
Europe, Australasia and Middle East – Corporate Office USA, Canada and South America
[phone] [phone]
Key fob Tag
TGF
-
A
The TGF-A Key fob tag can be used for
both security and control purposes. In
security applications it is often used awake
with its beacon being used to locate
personnel within and zone and to detect any
alarms.
In control applications the TGF tag can be
combined with the RX211 access reader
which when suitably configured can open
either set of relays corresponding to either
button 1 or button 2 being pressed on the
TGF-A.
Model Range
The tag can be ordered using the part
number listed below:
L-Series
TGF : Standard tag
Ordering & Further Information
For more information on purchasing the
Activ TGF-A Tag
please email
Wavetrend’s Sales team:
[e-mail]
For more information on Wavetrend
®
visit
our website.
Specifications
IP Information
Wavetrend and the Wavetrend logo are either registered trademarks or trademarks of Wavetrend
Technologies Limited in the United States and/or other countries. All other
trademarks are the property of
their respective owners. The product(s) described in thi
s document are protected by various patents held by
Wavetrend. Refer to the URL www.wavetrend.net/IPR
for information on all patents and trademarks held,
and for Wavetrend's Policy on Intellectual Property Rights.
Typical Applications
Environmental
Operating temperature
Storage temperature
Humidity
: -30°C to +60°C
: -40°C to +70°C
: 5% to 90% (non-condensing)
Physical
Size
Weight
Colour
Material
: 57 x 35 x 10 mm
: 14 grams
: Black
: Nylon IP64
Radio Frequency
Transmit Frequency
Power Output (avg.)
Range
: 433.92 MHz
: 77 dBV/m @ 3m
: 1 to 100+ meters (actual range is determined by the
choice of reader & antenna used to detect the tag and
the environment it is used in)
Electrical
Power : Internally powered by Replaceable lithium battery
FCC Statement of Conformity
Wavetrend , TGFA Active Duo ,
FCC ID: 06XTGF-A
This device complies with Part 15 of the FCC rules subject to the following three conditions:
1) This device may not cause harmful interference.
2) This device must accept all interference received, including interference that may cause
undesired operation.
3) This device is for commercial use only and intended for use in a confined area with an
appropriate system receiver
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.