User Guide

10
Reset
To rest the Click 512, follow the steps below.
1 Hold the push-button down, then release when the red LED starts flashing.
2 Press the push-button to select. The first yellow LED will turn on to let you use that submenu.
3 Hold down the push button again to cycle between the following options:
˽ Yellow 1 – Resets all setting except Serial Number and XML variable map.
˽ Yellow 2 – Resets all settings except Serial Number.
4 Release when you reach the one you want. Press the push-button to select.
After the device is reset, it will return to the last mode that it was in.
WX-500-0196
© 2022 Wavetronix LLC. All rights reserved. Protected in the US by patents viewable at www.wavetronix.com/en/legal. Protected by Canadian Patent Nos. 2461411; 2434756; 2512689; and European Patent Nos. 1435036; 1438702;
1611458. Other US and international patents pending. Wavetronix, SmartSensor, Click, Command and all associated logos are trademarks of Wavetronix LLC. All other product or brand names as they appear are trademarks or
registered trademarks of their respective holders. Product specifications are subject to change without notice. This material is provided for informational purposes only; Wavetronix assumes no liability related to its use.