User's Manual
1
Installing the SmartSensor 105 is quick and easy. Once installed, the
SmartSensor requires lile or no on-site maintenance. This chapter will describe
the installation process, including how to aach the sensor to the pole and how
to correctly align the sensor.
Selecting the Offset and Mounting Height
After selecting a mounting location within the recommended range of osets
(see introduction), use Table 1.1 to select a mounting height. See Figure 1.1 for an
illustration of what is meant by oset and mounting height.
In this Chapter
Selecting the Offset and Mounting Height
Attaching the Mount Bracket to the Pole
Attaching the Sensor to the Mount Bracket
Aligning the Sensor to the Roadway
Applying Silicon Dielectric Compound
Connecting the SmartSensor Cable
Installing the SmartSensor 105